bits and notes

by Sam Sulaimanov (bitmorse)


This is an old revision of the document!



Warning: Undefined array key "title" in /home/public/inc/parser/xhtml.php on line 1892

Test jig for castellated pin module

We had the need to test a custom module that came back from assembly. The module is meant to be soldered onto another PCB via castellated pins and is very small.

As holding a multimeter probe (even if its a PCBite) would be a nightmare for more than one piece, I designed a little test jig that uses 0.7mm (!) pogo pins (MPN: 1007-D-0.7N-AU-0.49). The pogo pin holder is 3d printed with the 0.4mm standard nozzle diameter and surprisingly comes out well. Even if it's hitting the resolution limit of the Prusa.

Soldering process:

blog/test_jig_for_castellated_pin_module.1617220212.txt.gz · Last modified: 2021/03/31 19:50 by bitmorse